ARM仿真器-foxICE 设为首页   |   加入收藏夹   |   网站地图         

更多 >> 


   首页>技术专栏>Redboot >RedBoot -- an open source boot/debug environment

RedBoot -- an open source boot/debug environment

作者:Paul Beskeen  
高速程序代码下载速度200KBytes/S以上内置对于GDB Remote Serial Protocol协议支持FoxICE仿真器完美支持GDB 的 File IO扩展协议免费赠送Eclipse for ARM V 3.2.1集成开发环境支持Nand Flash( S3C2410/2440/2442可任选一种 )的烧写,支持超低电压的处理器调试, 目标范围为:0.65 ~ 5.5V
详细信息 >>

RedBoot is a new embedded system debug/bootstrap environment from Red Hat. It is designed to replace the existing debug/boot tools CygMon and GDB stubs. It provides a complete bootstrap environment, including network downloading and debugging. It also provides a simple flash file system for boot images.

"RedBoot" may be thought of as an acronym for " R ed Hat E mbedded D ebug and Boot strap". RedBoot provides a wide set of tools for downloading and executing programs on embedded target systems, as well as tools for manipulating the target system's environment. It can be used for both product development (debug support) and for end product deployment (Flash and network booting). It is based on the eCos hardware abstraction layer (HAL).

Within the embedded industry, there exists no standard architecture or implementation for bootstrapping embedded computers. Because RedBoot is based on eCos, which is capable of running on many architectures, and because its debugging support is based on gdb, RedBoot can become a common embedded standard. Thus, RedBoot can provide a common basis for bootstrapping Embedded Linux, eCos, and many other operating systems.

RedBoot includes the following basic functionality:

  • Remote debugging support -- connectivity between host and target systems over serial and Ethernet interfaces (gdb stubs)
  • Simple command line interface -- available via serial or Ethernet
  • Flash memory management -- download/update/erase of multiple flash boot images, boot direct from flash
  • Network booting -- inc setup and download (bootp/dhcp, tftpboot)
  • Attribute Configuration -- user control of aspects such as system
    time and date (if applicable), default Flash image to boot from, default failsafe image, static IP address, etc.
  • Configurable and extensible -- easily adapted to the target environment
  • Universality -- RedBoot supports GNUPro, eCos, and Embedded Linux use on the embedded target as well as other operating systems.

One of RedBoot's important benefits is that it includes support for -- and therefore enables -- remote debugging of the target board. Often, one has to use special devices hooked to embedded boards to debug the code running on them. This enables developers to run the debugger in a familiar host environment (e.g. the Linux desktop) that is remotely talking via a serial or Ethernet connection to the board from a desktop system, or from some remote machine over a network.

Supported platforms currently include: ARM, MIPS, MN10300, PowerPC, SH ( Hitachi ), NEC v850, and x86 (Intel architecture).

RedBoot currently provides three basic classes of commands:

  • Program loading and execution
  • Flash memory image and configuration management
  • Miscellaneous commands

Of course, given the extensible and configurable nature of eCos and RedBoot, there may be more [or fewer] sets of commands available.

Although RedBoot is derived from eCos, it is not eCos but rather may be used as a generalized system debug and bootstrap control software for any embedded system and any operating system. For example, with appropriate additions, RedBoot could replace the commonly used BIOS of PC (and certain other) architectures. Red Hat is currently installing RedBoot on all embedded platforms as a standard practice, and RedBoot is now generally included as part of all Red Hat contracts for Embedded Linux and eCos ports.

Preliminary RedBoot documentation, including a draft of the RedBoot User Guide, is available on Red Hat's developer website. RedBoot documentation currently covers the following topics:

  • RedBoot Overview
  • How to install RedBoot on your hardware
  • RedBoot commands and examples
  • Building RedBoot from the supplied sources
  • Configuring and extending RedBoot functionality -- including how to use RedBoot in a production environment, as opposed to its use for embedded computer development/debug.
  • How to port RedBoot

Here are pointers to some currently available RedBoot information and documentation:

  • RedBoot User's Manual -- the preliminary user's manual for RedBoot is available, in pdf format, here . It currently includes the following sections . . .

Common commands
Download Process
Flash Image System
Persistent state [flash-based configuration] control
Program execution
Installation and testing


  • RedBoot Source Code -- the latest sources for RedBoot are part of the standard eCos source tree, which is available via anonymous CVS here .

Since RedBoot is an eCos package, you need only have the eCos sources to build it. Then, just enable/include the RedBoot package and you're done.

What's next?

Red Hat is presently working on adding such features as power-on-self-test (POST) and USB connectivity (including download and debug). Also, there are numerous ongoing ports to additional CPU and board architectures. Future enhancements will include incorporation of support for secure field upgrade of firmware and boot images remotely over the net, in a manner that will be compatible with Red Hat's new Red Hat Network.

Since announcing RedBoot, Red Hat has received strong interest in RedBoot from semiconductor companies and board manufacturers who are eager to provide a common, open source, portable, boot and debug solution that can support Embedded Linux and other OSes. Red Hat's aim is to make RedBoot an industry standard for embedded boot firmware -- both in the development and production environments.


  1. 未经本站明确许可,任何网站不得非法盗链及抄袭本站资源!

首页 | 产品介绍 | 技术支持 | 下载中心 | 技术专栏 | 关于我们 | 联系我们
电话:86-755-82798083   82796301   传真:86-755-82799007

© 2006 版权所有